Settings for Radix receivers

HOW TO RESET YOUR RADIX  OR GOD CHANNEL RECEIVER

Take your remote control and point it at the receiver

1. Press MENU button on the remote  [Main Menu displays]

2. Press 3 [Channel Manager menu displays]

3. Press OK [ Auto Search menu displays]

4. 'Satellite 1' is highlighted

5. Use left or right arrow to change the Satellite name to PAS-10 (also called PANAM10)
   If you cannot find it, press BACK and follow instructions below on Transponder Editor, then resume from this point onwards.

6. Move down to line 6 and using left/right arrows, change it to read:  No Satellite

7. Move down to line 11.   Press OK to start searching.

8. Watch the box on the Right-hand side, which should display the available stations.

9. Wait till the screen automatically switches to a TV station

10. Press OK to see a list of available stations.  Hope Channel is usually #5. Move to selected station, and press OK.

TRANSPONDER EDITOR  How to add PAS-10 to the list of satellites

From the Channel Manager Menu:

1. Move down to '3  Transponder Editor'  [Transponder Editor screen displays]

2. Press UP arrow and highlight last [empty]  space for a new transponder.

3. Press OK  (An area opens below, allowing you to write PAS-10 using the up / down arrows and left / right arrows.

4. Press OK [Cursor jumps to right-hand box on screen}

5. Press OK to add new information  [Yellow highlight shows below TP]

6. Enter under TP: 12722,  Under H/V:  V, and under S/R: 26652

7. Press BACK.  PAS-10 should now be on your list of satellites

8. Press BACK to return to Channel Manager menu.

9. Carry out the instructions from #5 above onwards.